goldeneye-pc-port/docs/dev/GRAPHICS-BACKLOG.md

GRAPHICS-BACKLOG — known cosmetic / rendering issues

Deferred below level-progression and crash work (user priority, M-11). Minor graphical glitches are acceptable in the current state. Fix these once the game is playable start-to-finish without crashes.

Open

ID	Symptom	Status / notes
D114/D116	HUD text + ammo digits render each glyph individually X-mirrored	CLOSED — NOT A BUG (M-33, §F D168). The GE_PCDUMP PPM writer never reversed glReadPixels rows, so every capture was upside-down; "mirrored" was a misread of inverted asymmetric content. The game renders correctly on hardware (developer-confirmed). Writer fixed (gfx_opengl.cpp). "Every stage verified non-mirrored" was correct — there was no mirror.
D74 wrap-block	gfx_pc.cpp:1546/1551 PORT block is dead code: guard cms & G_TX_WRAP with G_TX_WRAP==0 is always false; and it indexes per-texunit [2] arrays with the vertex index i (0..2) → OOB if reached.	Latent. Harmless for CLAMP glyphs; could affect wrapped textures on triangles (room panels, model skins). Fix: cms == G_TX_WRAP, and compute the tile window once per tile not per vertex. Verify against tools_pc/golden/ after.
D75	Nintendo logo mispositioned; gun-barrel Bond model absent; cast-roll character models — status unknown. (Rareware logo OK.)	Shrunk (M-33, upright captures after D168). The "overlaps D114 shared mirror" note is withdrawn. Gun-barrel Bond RENDERS correctly (walk + fire, upright) — the "absent" reports were the flipped capture. Nintendo logo IS still broken — renders as two overlapping white ellipsoids shifted left, no wordmark/geometry (a real logoinst model transform/geometry bug, not a flip). Cast roll not re-captured — recheck with GE_PCDUMP="1400-2200:25". findings.md §F "D75 Bug 2 — M-33 UPDATE".
D76	2D disclaimer screen only partially drawn.	§F D76.
D77	No audible music on PC.	Phase 3 (audio). §F D77.
D116 (HUD)	proportional-font strings + ammo counter mirrored	CLOSED — NOT A BUG (M-33, §F D168). Same capture-orientation artifact as D114.
D148	Level-end cinematics don't play. Dam: hitting the exit trigger should show Bond rappelling down the dam (the bungee jump); instead it cuts straight to the mission-complete report.	Scripted cutscene / cinematic-camera + Bond rappel anim. Found M-27 during the first full Dam→Facility playthrough. Progression is unaffected — the report and next briefing load fine. M-31 (§F D160): static-traced the Dam end ailists (ai_24→ai_17, camera_switch→CutsceneRecord type-46 lookup). Diagnostic GE_D160=1 shipped (c95713f5) — user runs Dam to the exit with it set; the trace pins whether the cutscene AI runs, and whether the propDef-index walk (D122/D132 family) hands camera_switch a bogus cutscene record. Leading hypothesis: propDef sizepropdef stride desync (medium confidence), not D75 anim-model.
D149	Front-end MISSION COMPLETE / mode-select 3D models (dossier, wallets) render as garbled full-screen geometry or not at all — one of the compiled sub-DLs (seg5+0x9ee4) is malformed, D146 now skips it instead of aborting.	D75 family. §F D146.
D170	Named-NPC "flee" scripted behaviour looks wrong on PC: on Silo, Ourumov breaks into a full run the instant he alerts ("Ourumov: Kill him!") rather than the N64 walk/retreat; developer reports Trevelyan behaves the same way on Cradle.	Observed, not investigated (M-34, from a Silo playtest capture; user bug report — no fix wanted yet). Could be a genuine ailist / chrTick divergence, OR the D155/D156 wall-clock deltaFrames locomotion-anim speed-up (a catch-up spike playing the walk cycle at 2–3×). Verify first: capture the same beat against N64 reference footage before assuming it diverges — Ourumov may be scripted to flee. If it's real, suspect the frametiming clamp (§F D155/D156) or the Cradle-family AI path (§F D123).
D171	Silo missile-shaft: a large translucent grey triangle sweeps across the lower frame while panning down the shaft (~3 s of the capture). Looks like a stray poly / near-plane clip fan, same family as D106 (portal near-plane min>max).	Observed, not investigated (M-34, Silo capture). Cosmetic, intermittent, tied to camera angle in the open vertical shaft.
D172	Bullet-impact / blood particle spray renders magenta or cyan instead of dark red (visible on guards hit at close range on Silo).	Observed, not investigated (M-34, Silo capture). A channel-order / CC-mode error in the particle-sprite path (magenta = R+B, cyan = G+B) — not the D64/D120 blood-decal family (those are crash/hang + missing decals, not colour). Likely a texture-format or env-colour decode in blood_animation.c / the fast3d sprite path.
D178	Objectives not listed correctly on the pre-mission briefing screen (the mission overview shown before starting a level).	Observed, not investigated (user QA report). "Not correctly" unspecified — wrong set of objectives, wrong order, or garbled/blank lines. Close relatives: D151 (watch objective text blank — type-35/23 text slot u16→u32 fix, M-28; interactive re-verify was still pending), D143 (briefing/objective text blank via langGet NULL), D157 (objective difficulty byte offset — could make difficulty-gated objectives appear/disappear wrongly). The pre-start briefing is a different surface from the in-level watch, so D151's fix may not cover it. Next: ask user which level + what exactly shows vs expected; compare against docs/dev/LEVEL-OBJECTIVES.md (regenerated post-D157); if lines are blank → D143/D151 family (langGet NULL guard = silent blank), if wrong objectives listed → propDef type-23 record walk / difficulty decode.
D175	In-game stutter / brief hang during normal play — observed opening a door on Runway (mission 3, -level_35) and also on Surface. No backtrace captured (gdb attach missed the window; it self-recovered).	Observed, not investigated (user QA report). Matches known transient-hang classes rather than looking new: D155 (post-slow-load catch-up spiral — clamped), D156 (anim NaN loop — guarded, prints one-shot stderr diag if it fires), D134 (SP/DP task-done event swallowed — fixed M-22, Runway was an original victim), D147/D152 (audio s_imLock steal = ~2 s hiccup). Door-open specifically = new room first visible → one-off texture-import/frame spike (likely benign). Next: reproduce under tools_pc/debug.ps1 with the box idle; check console for the D156 stderr diag; if it recurs, attach gdb mid-hang and pattern-match bt (import_texture = benign slow frame; model.c:3131 spin = D156; pthread_mutex_lock on s_imLock = D147/D152).
D176	Skybox broken on Surface (which of Surface #1 -level_36 / #2 -level_43 unconfirmed — ask user).	Observed, not investigated (user QA report). "Broken" unspecified — could be missing/black sky, wrong transform (D75 logoinst family), or a texture-import issue on the sky tiles. Capture with GE_PCDUMP + GE_DTEX/GE_TEXDUMP on the specific level to see what the sky DL is doing.
D174	"No blood effect" — user reports no visible blood when shooting guards / into surfaces.	User QA report; likely D120, unverified. Decals: the D120 PointUsage[] converter fix (M-30) was never interactively verified and only takes effect after a full sidecar regen (d43 && d69 && d88 --regen) — check whether the playtest build had regenerated sidecars before concluding the fix failed. Spray: D172 observed the particle spray drawing (wrong colour, magenta/cyan) on Silo — if the user sees no spray either, that's new info (different weapon/range, or the D172 decode is worse than "wrong colour"). First step: BUNKER1 firefight with regenerated sidecars; if decals still absent, instrument the chr.c:3328 decal walk.
D173	Third-person Bond model (the player-representing figure shown at level start) spawns too high — floats well above the ground "a lot of the time" while the actual player spawn is correct. Same symptom on the Cuba end credits: JB stands ~6 ft in the air above Natalya.	Observed, not investigated (user QA report). D75 animated-model family but a position defect, not absence — M-33 confirmed the gun-barrel Bond renders fine upright. Suspects: (a) intro/credits puppet chr spawn position vs the model's base transform; (b) anim root-motion accumulation (modelSetAnimFrame2WithChrStuff, D156 area) offsetting the rendered joints above the body origin; (c) a coord3d/packed-float decode in the intro camera/model setup. "Player spawning is OK" localises it to the render-side model, not g_CurrentPlayer state.
1P weapon viewmodel	In-level first-person weapon models don't draw at all (no gun visible while playing).	Already documented — AUDIT-M6 #5 (docs/dev/AUDIT-M6-player-offsets.md, "prime suspect") + §F D115 "still open (MED)"; M-8 handoff listed it NOT STARTED with a plan: instrument gunfire.c:600-661 setup + field_87F gating first, then check weaponModel.render_pos arena lifetime and weaponRwPool[192] sizing. Note M-32b's "render_pos/dynAllocate RULED OUT" probe was the front-end gun-barrel path (title.c), not this in-level path — candidate #5 still stands. Distinct from the watch-page "dark/faint weapon model" (D75, D141 note).

Resolved (for reference)

• D70–D74: intro-logo pixels (Rareware logo renders correctly).
• D103: viewport / native-resolution half-frame.
• D105: room geometry Z-buffer never cleared (G_CLEAR_DEPTH_EXT).
• D106: sky-void through doorways (portal near-plane min>max).
• D107: blurry ceilings/wall-panels (LOD mip tile fabrication).
• D112: skeletal models were "3D lines" (d43_emit.py put_f32 byte order).